Full gelcoat restoration, marine ceramic coating, teak cleaning, and superyacht-level detailing for Bonita Springs, Naples, Fort Myers Beach, Punta Gorda, LaBelle, Alva, and Pine Island. We work at all major boat yards, marinas, and residential docks. Glidecoat Marine certified.
Oxidation Removal · Compounding · Mirror Finish
Full Gelcoat Restoration
Oxidation is the enemy. The Florida sun, salt air, and relentless UV exposure create a chalky, gray haze on your hull that wax cannot fix. Our multi-stage gelcoat restoration — wet sanding, heavy-cut compounding, medium-cut compounding, swirl remover polish, and machine polishing — eliminates decades of oxidation damage and restores your hull to a deep, mirror-like gloss that rivals the showroom floor.
Our Process
On-site assessment and test spot evaluation
Wet sanding with progressive grit progression (400–2000)
Heavy-cut compounding to remove sanding marks
Medium-cut compounding to refine the surface
Swirl remover polish for scratch-free clarity
Machine polishing to restore mirror-level depth
Polymer sealant application for UV protection
Full written inspection report + before/after photography
Full gelcoat restoration and oxidation removal for boats and yachts in Bonita Springs, Naples, Fort Myers Beach, Punta Gorda, LaBelle, Alva, and Pine Island, Florida.
Certified
Stop Buffing — The 2026 Gold Standard
Marine Ceramic Coating
Stop buffing every season. Traditional wax lasts 60–90 days in the Florida sun. Our Glidecoat Marine Ceramic Coating bonds permanently to your hull at the nano level — delivering 12–18 months of UV armor in full sun (2–3 years under cover), extreme hydrophobic protection, and a mirror finish that wax can never match. Wax is dead. Marine Ceramic is the future.
Our Process
Full gelcoat restoration (compounding + polishing)
Clay bar decontamination to remove embedded contaminants
IPA wipe-down for surface cleanliness
Glidecoat Marine Ceramic application in controlled conditions
Glidecoat certified marine ceramic coating for boats and yachts in Bonita Springs, Naples, Fort Myers Beach, Punta Gorda, LaBelle, Alva, and Pine Island, Florida.
Teak decks, rails, and trim are the hallmark of a well-maintained vessel — and the first thing that shows neglect. Salt, mildew, and UV exposure quickly turn golden teak gray and black. Our professional two-step acid/base teak cleaning treatment safely strips years of weathering and restores the warm honey-gold color that defines a properly cared-for yacht.
Our Process
Pre-rinse and initial assessment of teak condition
Step 1: Acid application to remove black mildew stains
Step 2: Base neutralization treatment
Thorough rinse and color assessment
Optional teak oil or sealer application
Caulking inspection and condition report
Maintenance recommendations for long-term care
Professional teak cleaning cleaning and restoration for boats and yachts in Bonita Springs, Naples, Fort Myers Beach, Lehigh Acres, Punta Gorda, LaBelle, Alva, and Pine Island.
Monthly · Quarterly · Priority Scheduling
Annual Maintenance Programs
Your ceramic coating and gelcoat restoration are investments worth protecting. Our annual maintenance programs keep your vessel in peak condition year-round — with priority scheduling, discounted rates, and full photo documentation at every visit.
Our Process
Monthly wash and rinse service
Quarterly polish and wax/sealant application
Annual full detail and inspection
Teak maintenance as needed
Metal polishing and teak surface care
Priority scheduling for maintenance clients
Boat maintenance programs and recurring detailing services for boat owners in Bonita Springs, Naples, Fort Myers Beach, Punta Gorda, LaBelle, Alva, and Pine Island.
Waterline Stains · Rust Streaks · Mineral Deposits
Hull Stain Removal
Florida's waters are hard on hulls. Waterline stains, rust streaks, and mineral deposits are inevitable — but they don't have to be permanent. Our specialized hull stain removal treatments safely eliminate these blemishes without damaging your gelcoat, restoring a clean, bright waterline.
Our Process
Assessment of stain type and severity
Appropriate chemical treatment selection
Safe application and dwell time
Mechanical agitation as needed
Thorough rinse and neutralization
Protective coating recommendation
Hull stain removal and waterline cleaning for boats in Bonita Springs, Naples, Fort Myers Beach, Punta Gorda, LaBelle, Alva, and Pine Island.
Engine Bay · Degreasing · Deep Clean
Engine Room Cleaning & Degreasing
A clean engine room is a point of pride for any serious boat owner. Our engine room cleaning and degreasing removes grease, oil residue, and salt deposits from all surfaces, leaving your engine bay looking as good as the rest of your vessel. We work carefully around all components to deliver a thorough, professional result.
Our Process
Degreaser application to all engine surfaces
Careful cleaning around electrical components
Engine bay wipe-down and dressing
Bilge area cleaning and degreasing
Final inspection and photo documentation
Engine room detailing services for boats and yachts in Bonita Springs, Naples, Fort Myers Beach, Punta Gorda, LaBelle, Alva, and Pine Island.
Chips · Cracks · Gouges · Color Matching
Gelcoat Repair
Chips, cracks, and gouges in your gelcoat don't just look bad — they allow water intrusion that leads to osmotic blistering and structural damage. Our gelcoat repair service matches your hull's original color with precision, fills and fairies the damaged area, and blends the repair seamlessly into the surrounding surface. The result is invisible to the eye and protected from further damage.
Our Process
Damage assessment and photography
Gelcoat color matching to original hull specification
Damaged area preparation and cleaning
Gelcoat fill application in layers
Fairing and leveling to match surrounding surface
Wet sanding and compounding to blend repair
Machine polishing to mirror finish
UV-protective sealant application over repair
Gelcoat repair, chip and crack repair, and color matching for boats and yachts in Bonita Springs, Naples, Fort Myers Beach, Punta Gorda, LaBelle, Alva, and Pine Island, Florida.
Water Spots · Mineral Deposits · Hydrophobic Coating
Glass & Windshield Restoration
Hard water spots and mineral deposits on marine glass and acrylic can severely impair visibility and look terrible. Our glass restoration process safely removes these deposits and applies a hydrophobic coating to prevent future buildup.
Our Process
Water spot assessment
Appropriate treatment selection
Safe chemical or mechanical removal
Polish and clarity restoration
Hydrophobic coating application
Final inspection
Hard water spot removal and windshield restoration for boats in Bonita Springs, Naples, Fort Myers Beach, Punta Gorda, LaBelle, Alva, and Pine Island.
Not Sure What Your Vessel Needs?
We offer free on-site evaluations. We'll assess your vessel's condition and recommend the right services — no obligation.
